Call 01260 279411
The Bahr ALLM consists of an aluminium profile with hardened steel spindles mounted on top of the profile. The carriage, which has internal linear ball bearings that can be adjusted free of play, moves along the unit. The linear motor ALLM unit is based on the principle of a linear, synchronous AC motor.
The guiding profile is fitted with permanent magnets as stator (secondary part). The carriage is fitted with the actuator (primary part). The magnetic attraction causes a force between carriage and guiding profile also in the absence of current. This force can be used for the initial tension of the bearings. Several carriages (primary parts) can be drive independently on one guiding profile.
- Length up to 6.4m with a single extrusion
- 3 frame sizes from 432mm to 480mm carriage width
- Speeds up to 8m/s for all sizes
- Up to 3900N of permanent thrust force and maximum force (for 1 second) of 6010N
- Repeatability +/- 0.05mm