Call 01260 279411
The Bahr DLM consists of a rectangular, aluminium profile with 2 integrated roller guides. The linear motor DLM unit is based on the principle of a linear, synchronous AC motor.
The guiding profile is fitted with permanent magnets as stator (secondary part). The carriage is fitted with the actuator (primary part). The magnetic attraction causes a force between carriage and guiding profile also in the absence of current. This force can be used for the initial tension of the bearings. Several carriages (primary parts) can be drive independently on one guiding profile.
- Length up to 6m with a single extrusion
- 3 frame sizes from 120mm to 200mm profile width
- Speeds up to 6m/s (varies with frame size)
- Up to 766N of permanent thrust force and maximum force (for 1 second) of 1735N
- Repeatability +/- 0.05mm