Call 01260 279411

Monitors and Counters

AX 020*: Panel Meter for Standard Signals (PDF Manual)

  • Simple low cost indicator with front dimensions 48 x 24 mm 
    (1.89 x 0.945’’) and LED size 8 mm (0.315’’)
  • Power supply 10 ... 30 VDC
  • Analogue inputs 0-10V,  0-20 mA and  4-20 mA
  • Display range  -19 999 to 99 999,  adjustable zero and full scale value, 
    14 bits of resolution
  • Latch input to freeze the display, minimum/ maximum record memory
  • Easy to set up by only two front keys and menu support
  • Delivery includes adapter frame for 50x25 mm cut out and 
    label set with dimensions

     ______________________________________________________________________

    Process Indicators with Analogue Input for Standard Signals and Strain Gauge


    AX 320: Standard Signal
    (2Preset-Relays, 2 Control Inputs, 10-30 VDC) (PDF Manual)
    AX 322: Standard Signal
    (2Preset-Relays, 2 Control Inputs, 90-240 VAC) (PDF Manual)
    AX 321: Strain-Gauge
    (2Preset-Relays, 2 Control Inputs, 10-30 VDC) (PDF Manual)
    AX 323: Strain-Gauge
    (2Preset-Relays, 2 Control Inputs, 90-240 VAC) (PDF Manual)

    • Low-cost indicator with a resolution of up to 15 bits and free scalable  analogue input, 0 – 10 V or 0/4 – 20 mA or strain-gauge
    • Programmable linearization with 12 interpolation points
    • Digital filter, totalization, and tare function
    • Easy programming by means of two front keys and menu support
    • Display range –199 999 ... 999 999, 15 Bit resolution
    • 6 decade LED display, 14 mm size
    • Front dimensions 96 x 48 mm (3.78 x 1.89’’)
    • Power supply 10-30 VDC (AX320/321) or  90-240 VAC (AX322/323)


      ______________________________________________________________________

    Universal Process Indicators with two Analogue Inputs and Calculations

    AX 342*: Dual Process Indicator (2 relays, RS232/RS485 interface) (PDF Manual)
    AX 345*: Dual Panel Meter (display only) (PDF Manual)
    AX 346*: Dual Process Indicator (PDF Manual)
    AX 347*: Dual Process Indicator (2 presets / outputs) (PDF Manual)
    AX 348*: Dual Process Indicator (serial RS232 / RS485 interface) (PDF Manual)

    • Low-cost multipurpose display with two separate analogue inputs, 
      each +/- 10V or  0/4 – 20 mA and individual scaling facility
    • Suitable for display of input channel 1 or input channel 2 as well as 
      the sum {1 + 2}, the differential {1 - 2} or the ratio {1 : 2}
    • Display range +/- 4 1/2 decades at 15 mm size (0.59’’)
    • 20 000 steps of resolution
    • Front dimensions 96 x 48 mm (3.78 x 1.89’’)
    • Power supply 115 / 230 VAC or 24 VDC (AX342: 24 VDC only)
    • Setup of  zero and full scale by means of two front keys and menu support
    • Tare function, selectable linearization functions etc.



    ZX 020*: Small-Size Panel Counter (PDF Manual)

    • Low-cost position or event counter with dimensions 48 x 24 mm (1.89 x 0.945’’)
      and 8 mm LED size (0.315’’)
    • Power supply 10 – 30 VDC
    • Impulse inputs A, B and Set / Reset input
    • Counting frequency 15 - 60 kHz, depending on counting mode
    • Programmable counting functions: (count A with B as up/dn select, sum A+B or difference A-B, quadrature count A/B, 2x90º)
    • Programmable edge count (x1, x2, x4), adjustable proportional and reciprocal factors 0.0001 – 99.9999
    • Power-down memory (10 years of data retention)
    • Easy to set up by two front keys and menu support
    • Add-on frame for 50x25 mm panel cutout

      ______________________________________________________________________

      ZX 122, ZX123*: Preset Counters with Relay Outputs (PDF Manual)

      • Multi-purpose counter with dimensions 48x48 mm (1.89 x 1.89’’)
        and operation modes as counter, tachometer or timer / stopwatch
      • Two presets and two output relays
      • ZX 122: 10 – 30 VDC power supply,  
        ZX 123: 90 – 250 VAC and aux. output 24 VDC for encoder supply, 
        otherwise both models are similar
      • Max. counting frequency 20 kHz respectively. 10 kHz
      • Bright LED display, 6 decades at 8 mm size (0.315’’)
      • Programmable impulse scaling factor
      • Easy to set up by four front keys and menu support
      • Add-on frame for 50x50 mm panel cutout (1.969 x 1.969’’)

        _____________________________________________________________________

      High-Speed Counters and Position Indicators with various Outputs and Interfaces

      DX 342*: Electronic Counter (2 relays, serial RS232/485 interface) (PDF Manual)
      DX 345*: Electronic Counter (display only) (PDF Manual)
      DX 346*: Electronic Counter (PDF Manual)
      DX 347*: Electronic Counter (2 presets / transistor outputs) (PDF Manual)
      DX 348*: Electronic Counter (serial RS232 / RS485 interface) (PDF Manual)

      • Universal multi-function counters with multiple operation modes as quadrature counter, event counter, display of  RPM, speed, cycle rate, baking and processing time and timer/stopwatch functions.
      • Counting frequency 100 kHz (A/B quadrature count)
      • Dimensions 96 x 48 mm (3.780 x 1.890’’) and 6 decade LED display at 
        15 mm (0.590’’) size
      • Universal inputs for sensors and encoders with PNP/ NPN or Namur characteristics (HTL level 10 - 30 V)
      • Easy scaling and setup by means of 3  front keys and menu support
      • Selectable linearization function with 16 interpolation points
      • Power supply 115/230 VAC or 24 VDC (model DX342: 24 VDC only)


      Contact Us


      Are you an OEM or System Integrator?

      For competitive pricing call us today on
      01260 279 411

      Authorised Distributor For