- Knowledge Base
- Products
- Control
- SIMOTION
- I am online to the SIMOTION, but cannot get online to SINAMICS Intergrated. What could the problem be?
The most common cause of this is attempting to get onlie to the device via an ethernet/profinet port other than that which is specified in the project.
Possiable remedy:
Open NetPro and check which port the PG/PC is connected to. If it differes to the port you are using, unplug your ethernet cable from the SIMOTION and change to use the port specified in NetPro. If it is not possibale to change the port you are plugged into, ammend the configuration in NetPro to reflect this.
Right click on the SIMOTION in the device tree, and goto 'Target device', 'Online access...', Navigate to the 'Addresses: Module' tab and ensure that the IP address of the port you are connected to is selected in the list.
Attempt to re-establish an online connection.
OUR PARTNERS
Authorised Distribution Partner For
